V6 Wheels

Minimalistic beadlock wheels designed to narrow your track width, save a little overall weight, and increase your front bias. These are cut from 3mm black g10, for maximum durability. Cut to order, with custom colors, designs and materials available. Let me know what you want to see.

Designed out of necessity, the overall stock track width of the Vertex6 is just a little too wide for 20” gates. These positive offset wheels solve that problem, and allow much greater tunability for your personal preferences. Using Dlux Fab 8mm hubs, this combination sets you up to run approx 15.5” wide up front, and 14” wide in the rear. Smaller hub will fit the front with some Dremel work to your knuckles, and hubs/spacers are plentiful, if you want to wider the rear.

Things to note:
These wheels do Not fit over the optional Redcat weight hangers. Bolt-on weights are typically Not allowed in competition. However, weight hanger solutions are already on the way.

These wheels are approx 3mm narrower than stock. Foams and inserts will fit a little snug. This is necessary to be able to narrow the front as much as possible.

Includes:

(4) wheel faces and back rings
(12) brass standoffs for front
(12) alum standoffs for rear
(72) stainless steel mounting screws
(2) .900 hubs for front (with axle shims)
(2) .225 hubs for rear (with axle shims)

Substitutions for hubs can be made, (for instance .600 front and .350 rear is what I'm running), but will be handled as a special order.